High Temperature Tools & Refractory


Frequently Asked Questions


 


Mizzou Castable Refractory:


This is a 3000 degree F, High Alumina Castable Refractory for making forges. You can cast the entire refractory liner for a forge or just the floor using this material! This material has a very high resistance to flux, if you're doing a lot of forge welding and have a dedicated forge for forge welding in, this is a great material to use! The only trade-off is that it isn't as good of an insulator as Inswool, but as with all things in life there are trade-offs, and you should consider the benefits of the durability of this material.

- 3000 degree temperature rating
- Highly flux resistant
- Density = 141 lb/ft^3
- Mix with water at a ratio of 5.2# or 0.6 gallons of water per 55#

- This material has a thermal conductivity of 7.4 btu-in/hr-F-ft^2 at 2000 degrees F

55 pound bags - $65 per bag

20 Pound Bags - $44 per bag

5 Pound Bags - $14 per bag

We can ship 20 pound bags of Mizzou in a USPS Flat Rate box to all locations in the U.S.A. and international locations!


Mizzou FAQ

5 Pounds


20 Pounds

20 Pounds with Flat Rate Shipping in the U.S.A.



55 Pounds

 


Kast-O-lite 26 LI Insulating
Castable Refractory:


This is a 2600 degree F, High Alumina Castable Refractory for making forges. You can cast the entire refractory liner for a forge or just the floor using this material! This material has a very high resistance to flux, if you're doing a lot of forge welding and have a dedicated forge for forge welding in, this is a great material to use!

This material has a much better thermal conductivity rating than Mizzou castable...a castable forge doesn't have to be expensive to operate!

- 2600 degree temperature rating
- Highly flux resistant
- Low thermal conductivity = highly insulating compared to Mizzou
- Density = 86 lb/ft^3

- Mix with water at a ratio of 11# or 1.2 gallons of water per 55#

- This material has a thermal conductivity of 4.0 btu-in/hr-F-ft^2 at 2000 degrees F and conducts almost 46% less heat through the forge shell at 2000 degrees F!


55 pound bags - $67 per bag

20 Pound Bags - $44 per bag

5 Pound Bags - $14 per bag

Kast-O-Lite 26 LI FAQ



5 Pounds Kast-O-Lite 26 LI
 


20 Pounds

20 Pounds Kast-O-Lite 26 LI with Flat Rate Shipping in the U.S.A.


55 Pounds Kast-O-Lite 26 LI
 

 


Kast-O-lite 30 LI Insulating Castable Refractory:


This is a 3000 degree F, High Alumina Insulating Castable Refractory for making forges. You can cast the entire refractory liner for a forge or just the floor using this material! This material has a very high resistance to flux, if you're doing a lot of forge welding and have a dedicated forge for forge welding in, this is a great material to use!

This material has a much better thermal conductivity rating than Mizzou castable...a castable forge doesn't have to be expensive to operate!

- 3000 degree temperature rating
- Highly flux resistant
- Low thermal conductivity = highly insulating compared to Mizzou

- Density = 90 lb/ft^3

- Mix with water at ratio of 9.9# or 1.2 Gallons per 55#

- This material has a thermal conductivity of 4.54 btu-in/hr-F-ft^2 at 2000 degrees F and conducts almost 40% less heat through the forge shell at 2000 degrees F!


55 pound bags - $77 per bag

20 Pound Bags - $48 per bag

5 Pound Bags - $16 per bag



Kast-O-Lite 30 LI FAQ


5 Pounds Kast-O-Lite 30LI 


20 Pounds

20 Pounds Kast-O-Lite 30 LI with Flat Rate Shipping in the U.S.A.




55 Pounds Kast-O-Lite 30 LI
 



High Temperature Tools & Refractory