High Temperature Tools & Refractory


Frequently Asked Questions


 

Pipe Nipples:

- Pipe nipples used for Forced Air and Venturi burner construction

- All fittings are black pipe


- 1/8" x 3" (sch. 80 - seamless) - $4.50

- 1/4" x 1" (close nipple) $2.00

- 1/2" x 6"  - $4.00

- 3/4" x 9" - $5.00

- 1" x 10" - $6.00

- 2" x 2" (close nipple) - $3.50

- 2" x 4" - $6.00
Pipe Nipples

Threaded Reducer Bushings:

- Bushings used for Forced Air and Venturi burner construction

- 1/4" x 1/8" bushing - $2.50

- 1/2" x 1/8" bushing (solid bushing) - $3.50
(use the above bushing for making a compression fitting for 1/8" pipe nipple)

- 1/2" x 1/4" bushing - $3.00

- 1 1/4" x 1/2" bushing - $9.00

- 1" x 1/2" bushing - $9.00

Reducer Bushings

45 and 90 Degree Elbow Fittings:


- Elbow fittings used for Forced Air and Venturi burner construction


- 1/8" 45 degree street elbow - $3.00 (female - male)

- 1/4" 90 degree elbow - $3.00 (female - female)

- 2" 90 degree street elbow - $9.00 (female - male)

Elbow Fittings

Tee Fittings:


- Tee Fitting used for Forced Air burner construction


- 2" x 2" x 1/2" Tee - $10.00
Tee Fittings

Bell Reducer  Fittings:


- Bell reducer use for Forced Air burner construction


- 2" x 1" Bell Reducer - $7.50

Bell Reducer

Mig Contact Tips:

-
1/4-28 threads.

- Use for orifice in Venturi burners.

.023 Mig Contact Tip - $2.50

.030 Mig Contact Tip - $2.50

.035 Mig Contact Tip - $2.50

.045 Mig Contact Tip - $2.50


MIG tip orifice FAQ

MIG Tips

Floor Flange:

Use this to connect a blower to the 2" pipe on a burner.

$9.00

Floor Flange

Ward  std. blk reducing Tee:

Use these reducing Tee's for building side-arm burners.

- 1 1/4" x 3/4" x 1 1/4" Ward std. blk reducing tee - $16.00

- 1" x 1/2" x 1" Ward std. blk reducing tee - $13.50


Ward Tee FAQ

Ward T



High Temperature Tools & Refractory